Metallic Yarn

Metallic Yarn for Knitting: Choosing Zari for Lace and Trims

Metallic yarn for knitting must bend, loop and run at low tension. This guide covers type, denier, twist and trial steps for knitted fabric, lace and trims.

By Suvarnatantu Technical Team Published 8 min read
Illustrated cover: rows of looping gold threads like knitted stitches and lace with a glinting trim line, for the article on metallic yarn for knitting and zari.
Zari Yarnmetallic yarndenierknittinglacetrimshome furnishingtwist

Metallic yarn for knitting should be fine, flexible and evenly twisted, so it forms loops without breaking, kinking or cutting the base yarn. Choose the type, denier and twist against the machine gauge and the base fibre, then confirm everything on a written specification and a trial run.

Knitting, lace and trim work are harder on metallic yarn than flat weaving, because every stitch bends the yarn sharply. This guide from the Suvarnatantu technical team explains how to shortlist zari for fine structures, what to state in an enquiry and how to test a sample before bulk production.

Why does metallic yarn behave differently in knitting?

In weaving, a metallic yarn lies fairly straight in the warp or weft and is bent only where it crosses another thread. In knitting, the yarn is drawn into a loop at every stitch, so it is bent through a small radius thousands of times per metre of fabric. Stiff or unevenly twisted yarn shows this at once as broken loops, snags and a harsh handle.

Metallic yarn is also less elastic than most base fibres. It does not stretch with the fabric the way cotton, viscose or nylon can. Yarn tension, needle and guide settings therefore matter more than they do for a plain yarn, and a small difference in denier or twist can change how the yarn feeds.

The same points apply to lace, where fine structures and open patterns leave the yarn exposed. Any irregularity in thickness or shine is visible, because there is little surrounding fabric to hide it.

Which type of metallic yarn suits knitting and lace?

Film-based metallic yarns are made in several constructions, commonly sold under type codes such as M, MX, ST and MH. These codes are not one universal standard, so each should be checked against a written description from the mill. Our guide to metallic yarn types explains what to compare behind each letter.

For knitting and lace, the practical question is how much body the yarn has. A construction with a smooth, protected surface and a soft handle generally suits the bending of loops better than a stiff, heavily finished one. Whether the yarn is used alone or carried with a base yarn also changes the choice.

Treat the type as a starting point and settle the final choice through a sample knitted on your own machine. A description on paper cannot show how a yarn will feed at your speed and gauge.

  • Ask the mill what the type code means in its own specification.
  • Ask how the yarn is protected against abrasion on needles and guides.
  • Confirm the yarn is intended for knitting or lace, not only for weaving.
  • Compare handle on a hand-knitted swatch before a machine trial.

How do you choose denier and twist for fine structures?

Denier decides how visible the metallic effect is and how fine a structure the yarn can enter. A finer denier suits fine-gauge knitting and delicate lace, while a heavier one gives a bolder effect but needs a more open gauge or a larger pattern. State the denier as a number with the tolerance you can accept, and match it to the machine gauge.

TPM, or turns per metre, and twist direction affect how the yarn lies and how it behaves under tension. Too little twist can leave the yarn flat and prone to splitting, while excess twist can make it lively and cause it to snarl or kink. Twist direction should be noted so that it works with the base yarn and does not untwist in the loop. Our post on TPM and twist direction covers S and Z twist in detail.

When metallic yarn is plied or carried with another yarn, the direction of the two twists matters. Opposite directions can open the combined yarn, while matching directions can tighten it. A short trial with the actual base yarn settles this faster than any rule.

How is zari yarn for knitting machines run without problems?

Zari yarn for knitting machines runs best at low and even tension, with smooth contact points. Check guides, tensioners and feeders for rough edges, since metallic film can be marked or cut by them. Package form matters too, because the yarn must unwind freely without snagging at the cone or tube.

Start at slower speeds on a new lot and raise speed in steps while watching for breaks, shedding and shade changes along the row. Keep notes of settings that worked, so the next order of the same yarn starts from a known point. Our guide to care and handling on loom and machine adds practical handling points that apply here as well.

Storage affects running as well. Yarn kept in damp or warm conditions can change in feel and wind quality, so follow the advice in our post on storing metallic yarn and zari before use.

  • Keep tension low and steady across all feeders.
  • Check every guide and tensioner for sharp or rough contact.
  • Raise machine speed gradually during the first trial.
  • Record settings against the lot number of the yarn.

What should you consider for trims and home furnishing?

Metallic yarn for trims and home furnishing is judged on more than appearance. Trims such as braids, edgings and tapes are handled, stitched and sometimes washed, and furnishing fabrics are exposed to light and abrasion. Agree the end use and care instructions with the mill before choosing, because these decide whether a softer or a more protected construction is better.

Colour needs the same planning. A trim often sits next to a woven or knitted fabric, so shade and shine must match across lots. Our posts on colour matching across batches and on specifying shade, shine and finish describe how to word this in an order.

For wider context on end uses, see the applications page, which lists where metallic and zari yarns are used across textile sectors.

What should you state in the enquiry and test in the sample?

A clear enquiry saves a round of sampling. State the yarn type, denier, TPM, twist direction, colour, package form and end use, and name the machine type and gauge. Our post on what to state in an enquiry gives wording for each item, and the technical data and specifications page shows the parameters the mill documents.

On receiving a sample, test it under production conditions rather than on a bench. Knit a representative length, check for breaks and uneven shine, then wash or finish it as you would the final product. Approve only what you have tested, and keep a retained piece for comparison with later lots.

When the trial is ready to begin, you can request samples from Suvarnatantu with the specification above attached.

  • Knit at production speed, not only by hand.
  • Inspect the fabric under the lighting of the end market.
  • Test finishing, washing or pressing steps used on the product.
  • Keep a retained swatch and the lot details for later comparison.

Read next

Frequently asked questions

Can any metallic yarn be used for knitting?

Not every metallic yarn suits knitting. Yarns made for weaving may be too stiff or too coarse for the repeated bending of loops. Ask the mill whether the construction is intended for knitting or lace, and confirm by knitting a sample on your own machine.

What denier is best for metallic yarn in lace?

There is no single best denier. Finer deniers suit delicate lace and fine gauges, and heavier ones give a bolder effect. Choose by matching denier to your machine gauge and pattern, then confirm it with a sample trial and a written specification.

Why does metallic yarn break on knitting machines?

Common causes are high or uneven tension, rough guides or tensioners, excess twist and poor unwinding from the package. Lower the tension, inspect every contact point and run the first trial at reduced speed before bulk production.

Should metallic yarn be knitted alone or with a base yarn?

Both are used. Carrying metallic yarn with a base yarn often improves handle and reduces strain on the metallic yarn, while using it alone gives a stronger effect. Test the combination, including twist direction of each yarn, before approval.

What details should a knitting enquiry include?

State the type, denier, TPM, twist direction, colour, package form and end use, along with machine type and gauge. Ask for a sample against that written specification, and approve it only after knitting and finishing it under production conditions.