Technical Knowledge

Metallic Yarn Specification: What to State in an Enquiry

A metallic yarn specification should state type, denier, TPM, twist direction, colour, packing and end use. This checklist helps weavers and sourcing teams write an enquiry that gets the right sample first time.

By Suvarnatantu Technical Team Published 7 min read
Illustrated cover: two gold threads twisting into a ply beside a column of ticked rows, for the article Metallic Yarn Specification: What to State in an Enquiry.
Zari Yarnmetallic yarnspecificationdenierTPMtwist directionenquiry

A metallic yarn specification should state the yarn type, denier, TPM, twist direction, colour, package form and end use. With these written down, a mill can quote against the same yarn you need and send a sample that runs on your loom or embroidery machine, instead of guessing from a vague request.

Most rejected samples trace back to an enquiry that said only gold, 150 denier or similar. This guide, from the Suvarnatantu technical team, explains each parameter, how to word it, and what to confirm in writing before a sample is approved.

Why does a metallic yarn specification matter before you ask for a quote?

Metallic and zari yarns are engineered materials. Two yarns can both be called gold and still differ in construction, thickness, twist and finish. A quote or sample made against an incomplete enquiry is a guess, and the guess is often wrong in a way you only find on the loom.

A written specification gives both sides one reference. It lets the mill check whether it can make the yarn, lets you compare offers from different suppliers on equal terms, and gives you something to test the delivered lot against. It also shortens correspondence, because fewer clarifying questions are needed.

How do you state metallic yarn denier?

Denier is the weight in grams of 9,000 metres of yarn. A higher denier means a thicker yarn. Metallic yarn denier affects how the yarn sits in the fabric, how much coverage a motif gets, and whether it passes through the reed, needle or shuttle without trouble.

State the denier as a number and say whether it is the nominal value you want or a range you can accept. If you are matching an existing yarn, say so and send a short length. Do not describe thickness only in words such as fine or medium, because these mean different things to different people.

  • Give the target denier as a number, for example in the form 'denier: your value'.
  • Say how much variation your process can tolerate.
  • State if the yarn is a single end or a plied or twisted construction, as this changes the final denier.
  • Mention the reed count, fabric construction or needle size so the mill can judge if the denier is sensible.

What does TPM in metallic yarn tell you?

TPM means turns per metre, the number of twists given to the yarn along one metre of length. TPM in metallic yarn influences how compact the yarn is, how it handles under tension, and how the surface catches light. A lightly twisted yarn can look flatter and broader, while higher twist gives a rounder, firmer yarn.

Not every metallic film yarn is twisted, so confirm whether your requirement is twisted or flat. If twisted, state the TPM you want. Because the right level depends on the loom, the fabric and the look, treat any figure in a catalogue as a typical reference and confirm it against a sample run on your own equipment.

Why do twist direction and type need to be written down?

Twist direction is S or Z, describing the slant of the twist. It matters when the metallic yarn is plied with another yarn, used in a warp and weft pairing, or run on machines that expect one direction. A wrong direction can cause snarling, uneven plying or a changed surface. Always write the direction in capital letters S or Z, never leave it as a default.

Type is the second item people omit. Letter codes such as M, MX, ST and MH are trade designations and are not one universal standard, so confirm what each means in the supplier's written specification. Describe the construction you need as well as the code, such as protection level and finish. Our post on metallic yarn types explains how to compare them.

  • Twist direction: S or Z, and whether the yarn is single or plied.
  • Type or construction: the code plus a plain description.
  • Base material or core, where you have a requirement.
  • Any surface finish or protection you need, such as a lacquer or coating requirement.

How should you describe colour and end use?

Colour is easy to get wrong in words. Gold, antique gold and light gold are not fixed shades, and screens misrepresent them. Send a physical reference such as a swatch or a thread, name the shade, and say under which light you will judge it. Our colours page shows the range so you can point to a named shade.

End use completes the picture. Say whether the yarn goes into weaving, embroidery, knitting or braiding, and name the product, for example a saree border, an embroidered garment or a furnishing fabric. Mention any washing, dry cleaning, heat or abrasion exposure the finished product must survive, because these decide the construction and coating, not just the look.

What else belongs on a purchase enquiry?

Beyond the yarn itself, the commercial and handling details prevent delays. These do not change the yarn but they change whether the order can be planned and shipped correctly.

Write the quantity you need, the number of colours, the package form such as cones, bobbins or spools, and the delivery destination. If you are an importer or exporter, mention the country and any documentation you expect. Ask the mill to confirm minimum quantities, lead times and tests in writing, since these depend on the product and are not fixed for every request.

  • Quantity, colour count and repeat order expectation.
  • Package form and the winding or core size your machine accepts.
  • Destination and any export documentation needs.
  • Testing you expect, such as colour matching or a check against your sample.

How do you approve a sample and keep the specification useful?

Ask for a sample made to your written specification, and test it on the actual loom or machine, not on a bench. Look at breakages, tension behaviour, lustre and colour in your own light. Record the result against each parameter, so any difference points to a specific line of the specification.

Once approved, keep the sample and the specification together as the reference for bulk orders. If you change denier, twist or colour, update the document and ask for a new sample. You can request samples from us through the samples page and check technical data on the specifications page.

  • Test on the production loom or machine.
  • Compare each parameter with the written specification.
  • Keep an approved sample as the standard for later lots.
  • Revise the specification whenever a parameter changes.

Read next

Frequently asked questions

What details should a metallic yarn enquiry include?

State the type or construction, denier, TPM if twisted, twist direction (S or Z), colour with a physical reference, package form, quantity and end use. Add destination if you import or export. The more of these you write, the closer the first sample will be to what you need.

Is the denier of metallic yarn the same as thickness in millimetres?

No. Denier is weight per 9,000 metres, not a diameter. It indicates thickness indirectly, and the actual width and look also depend on construction. Give the denier as a number and send a reference length if you are matching an existing yarn.

Do I need to give TPM for every metallic yarn?

Only for twisted constructions. Some metallic yarns are not twisted, so first say whether you want a twisted or flat yarn. If twisted, state the TPM you want and confirm it by running a sample on your own equipment.

Why does twist direction matter?

Twist direction, S or Z, affects plying, how the yarn behaves with other yarns and how it runs on some machines. A mismatch can cause snarling or an uneven surface. Write the direction in the enquiry so it is not left to assumption.

How do I make sure the colour matches?

Send a physical swatch or thread and name the shade, since screen colours vary. Judge the sample under the light you will use in production, and keep the approved sample as the reference for later lots.